Author Topic: Audio from Flex1500/3000 using RRC1258  (Read 1793 times)

DB3FJ

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Audio from Flex1500/3000 using RRC1258
« on: 2019-01-13, 17:36:11 »
Hello,
I would liekt to know if anybody used the RRC1258 to remote a Flex1500/3000 for audio, CW and to use the RS232 for rotator control.
I don't want to use the audio from Teamviewer, RemAud, Skype, RemoteDesktop and so on because I had good experience with the RRC and I love to get use the RS232 for the rotator control!

73 de DB3FJ
Karsten

KB8CR

  • Full Member
  • ***
  • Posts: 104
  • IC-7100 and IC-706 on RRC's
    • View Profile
    • Email
Re: Audio from Flex1500/3000 using RRC1258
« Reply #1 on: 2020-06-14, 02:38:55 »
Karsten:

I use my RRC with my Flex3000 with great results. I feed the audio from the Headphone jack of the 3000 to the speaker input on the RRC-Radio box. I set the straps inside for a Yaesu modular microphone.

At the control end, I am using a Heil microphone, Icom speaker and a Palm Mini Paddle.

Charlie KB8CR

DF1NP

  • Jr. Member
  • **
  • Posts: 46
    • View Profile
Re: Audio from Flex1500/3000 using RRC1258
« Reply #2 on: 2020-06-14, 18:26:06 »
Hello Karsten,

I also use Remoterig together with my Flex 6400. Audio and cw is way more faster than via SSDR!

Look here for some solutions on Flex Radio Community:

https://community.flexradio.com/flexradio/topics/how-to-add-remote-contest-capability-to-flex-6000-without-a-remote-pc
https://community.flexradio.com/flexradio/topics/my-proposed-remote-smart-sdr-setup-will-it-work-obvious-problems

73
Willi, DF1NP