Webswitch 1216H Support in English > Configuration, Webswitch 1216H

AS-1289 Webswitch Remote Access via DDNS

(1/3) > >>

K3GGN:
My AS-1289 is working on LAN at the remote site.  I am unable to reach it remotely from my control site using "Own host name" http://xxxxx.ddns.webswitch.se as specified in the manual and receive the error "This site can't be reached".  (xxxxx is the name assigned by the webswitch).

Port forwarding is setup at the remote router.  When I go to ddns.remoterig.com/status/ the response is:

RRC DynDNS Result

User:  ws1216H-3648
Host Name:  xxxxx.ddns.webswitch.se
IP Address:  50.50.244.222
Last update:  2020-06-30  o2:46:12
Update count:  7

Further, RRC-1258 MKII is working nicely with K3 Twins.

Help is appreciated!
Dean

dj0qn:
Dean,

You forgot the port number in the URL. It must be xxxxx.ddns.webswitch.se:YYYY where YYYY is the
port number that you forwarded.

73,
Mitch DJ0QN / K7DX

K3GGN:
Yes, thanks Mitch.  But get "refused to connect".  At the router I tried setting up a new forwarded port and still get the error.

dj0qn:
Dean,

That error message doesn't make much sense.....where is it coming from? The browser, router or RRC?

If you are within the same network as the Webswitch, you should use the internal IP address and not the
DDNS address, e.g. 192.168.X.XXX:YYYY. A decent router should block the connection if you use the DDNS
address and give you that kind of error message.

73,
Mitch DJ0QN / K7DX

K3GGN:
The error comes from the browser when I attempt to connect to http://xxxx.ddns.webswitch.se:13005 from my control location.

Navigation

[0] Message Index

[#] Next page