Author Topic: FTdx-5000 dual receive  (Read 2264 times)

George W1EBI

  • Newbie
  • *
  • Posts: 8
    • View Profile
FTdx-5000 dual receive
« on: 2020-08-10, 03:38:31 »
How do I get dual receive with the FT5000?  The remote radio shows Status Dual Rx=1.  The control radio shows Status Dual Rx=0.  I cannot get the control radio to give me VFO-B audio on a different frequency in my right ear, I hear only VFO-A audio in both ears.

George W1EBI

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: FTdx-5000 dual receive
« Reply #1 on: 2020-08-10, 09:39:28 »
Hi

There is only the Dual-RX setting in the radio-rrc which need to be active, but you have to setup the radio correct also, and use a stereo cable.

very old RRC did not support dual rx. Here you can see the different versions of the RRC

http://www.remoterig.com/wp/?page_id=1395

73 de mike