Author Topic: iPhone 13 as Hotspot Query  (Read 7129 times)

WU6X

  • Jr. Member
  • **
  • Posts: 44
    • View Profile
    • Email
iPhone 13 as Hotspot Query
« on: 2021-10-24, 00:27:03 »
Has anyone used the new iPhone-13 as a hotspot to connect to the RRC-1258 Control-RRC with wifi card? I've been able to scan and find an iPhone 7 and 10, and successfully use these as cellular network connections to the Internet and remotely control my home station, but the 13 fails to show up in a scan.

VK3ALB

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
Re: iPhone 13 as Hotspot Query
« Reply #1 on: 2021-10-24, 08:38:49 »
Is it a 2.4GHz hotspot?

Sent from my CPH2195 using Tapatalk

Lou
VK3ALB

WU6X

  • Jr. Member
  • **
  • Posts: 44
    • View Profile
    • Email
Re: iPhone13 as Hotspot SOLUTION
« Reply #2 on: 2021-10-24, 22:12:02 »
SOLUTION: I found that the new iPhone13 will transmit a hotspot connection on 2.4Ghz or 5Ghz. In order to use it with the RRC-1258 MkII WiFi board, you must lock the iPhone13 at 2.4Ghz.

From Apple: Since some older devices can only use a 2.4GHz connection, like the RRC-1258 MkII, which can lead to compatibility issues, Apple has introduced a new "Maximize Compatibility" option so you can switch to 2.4Ghz when needed. When the Maximize Compatibility option is toggled ON, the hotspot will broadcast only on 2.4Ghz.

This setting is found under Settings/Personal Hotspot.

In addition, set the Control-RRC to DHCP using Microbit Manager. This setting is found on the SETUP tab, [Get From Device] button. This will allow the iPhone to assign an IP address to the RRC. I've setup a unique PROFILE to automatically switch from the default IP to the iPhone DHCP IP assignment when traveling.

« Last Edit: 2021-10-25, 23:23:14 by WU6X »