RRC 1258 Support in English > Configuration, RRC 1258

help me please


hy guys.
my name is luis and i'm trying use the remoterig at the office via internet.
in home, at garden working well. in office canīt use it

any help ?

Name   Value
P5.4   ON
Radio   OFF
Connection status   Disconnected
SIP status   Error
Last SIP error   SIP Error
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
SIP Out port   13000
SIP In port   13000
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002
Other party
Input 0   High
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DNS status   OK, remoterig.com =
Active profile   Default
PTT status   OFF
Common network settings   No

Sip error and i don't no why.
thanks for helping me
all the best
ham regards

Hi Luis,

Most likely your problem is related to not using the correct SIP contact (the external IP address or dynamic DNS address), and/or
the port forwards are not setup correctly.

Send me a short email to dj0qn (at) darc (dot) de and I will send you my networking checklist to walk you through the installation.

Mitch DJ0QN / K7DX


[0] Message Index

Go to full version