RRC 1258 Support in English > Configuration of Routers, Firewalls, etc

Router configuration

(1/1)

sndtubes:
I’m sorry guys, I am clueless when it comes to this networking stuff.   I have a couple of stupid questions

I want to have 2 remoterig sets going on my network at one time.  Do I change all of the udp settings on one of them to 13003, 13004 and 13005 along with the main port from 80 to something like 73?   Anything else I need to do

The remoterig control had sip contact to some ddns server.  Didn’t work.  I changed to the radio ip and it worked.  But only on the local network.    Any pointers here? 

Thanks for your help

sm2o:
Hi

yes the second Remoterig set need to be configured with different  portnumbers compared to the first set (in both units) if they should be used trough a NAT router. You also need to add portforwarding for the second set in the Radio site router

73 de mike

sndtubes:
Got them going.  Thanks!

sndtubes:
Well all is not quite well. Both units come up and work separately.   They even work for a short time simultaneously.  But after a few minutes one of them will lose synch and it’s connection.  One radio is a k3 and the other is a 7100. Any ideas?

sm2o:
A bad router maybe. Many users including my self using several Remoterigs connected to the same NAT router.

73 de mike

Navigation

[0] Message Index