RRC 1258 Support in English > Hardware, Cabling, Installations

Wiring for TS-590 Twin Control side

(1/1)

HB9BJL:
Hello all,

in the PDF-file for the wiring for the TS-590 S(G) Twin Control side "TS-590 -> RRC-1258MkII" dated 141029,

downloadable here: https://www.remoterig.com/schema/K19-20-TS-590-twin.pdf

there is a fault in the drawing:

TS-590CAT port to RRC-1258MkII Control Side:
D-SUB 9p fem to D-SUB 9p fem

The correct pinout is:
2 to 3
3 to 2
5 to 5
7 to 7
8 to 8

The connections to the pins 7 to 8 should be straight and not crossed.
The drawing in the Remoterig RRC-1258 MkII Users Manual A40.pdf, Page 218, is, however, correct.
With this drawing I was able to connect two TS-590S with the Firmware 2.05 sucessfully together.
The Baudrate of 19200 Baud may be adapted to your local needs.
Please correct the mentioned pdf-file.
73 de Christian,
HB9BJL.
 

sm2o:
Hi

TU for the info nobody has noticed it before. I have removed the link and put a text referring to the users manual instead.

73 de mike

Navigation

[0] Message Index