RRC-Nano > Feature Requests

I can no longer connect

(1/1)

JJ8LNX:
Not recently, but for about 3 years now, Nano has been unable to connect.
I purchased a paid app for the IC-7100 and TS-480 and was able to use it for a while, but when the coronavirus started to spread, when I tried to connect, it was connected to the network (the radio was turned on) but No voice or control whatsoever. I can't use either application.
My friend also purchased a separate application to remotely control my radio, but it stopped working around the same time.
Around that time, I contacted them via email, but I didn't hear back from them, so I left it alone, but since a failure occurred in another case, I remembered it and would like to write about it here.
I definitely want a reply.

sm2o:
Hi
The Kenwood and ICOM nano app works OK with both IC-7100 and TS-480. Download the latest versions and check your settings you probably have something wrong. Remember that CAT cables and CI-V interfaces are needed and Correct  mode and baudrade must be setup in the Radio-RRC com2 settings. The Radios need to be set to coorect baudrate, not Automatic.

73 de mike

Navigation

[0] Message Index