Messages

1

Configuration, RRC 1258 / RRC-1258 MkII: Radio and RRC-1258 MkII: Control not connecting to each other

« on: 2019-08-27, 23:47:27 »

Hi my RRC-1258 MkII: Radio and RRC-1258 MkII: Control are not connecting to each other.  Can anyone help? 

Status info below:

Control

Name   Value
P5.4   ON
Radio   OFF
Connection status   Disconnected
SIP status   Unknown(1)
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   3
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
SIP Out port   13000
SIP In port   13000
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002
Other party   24.208.28.10
Input 0   High
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DNS status   OK, rsba1-remote.dyndns-remote.com = 24.208.28.10
Active profile   Default
PTT status   OFF
Common network settings   No

Radio

P5.2   OFF
Connection status   Disconnected
SIP status   Idle
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
External IP   24.208.28.10
SIP Out port   13000
SIP In port   13000
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002
Other party   0.0.0.0
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
Dynamic DNS status   OK
Ping status (watchdog)   OK [0 ms]
DNS status   OK, remoterig.com = 213.180.92.125
Active profile   Default
PTT status   OFF
Antenna-Switch (IP)   not connected
Common network settings   No