Show Posts
16
Configuration, RRC 1258 / Begining setup questions
« on: 2011-10-07, 17:29:05 »
Hi all.
Yesterday I ordered the RR setup and it should arrive today. Last night I started with some of the router setup but have a couple questions:
1. I registered my dyndns name using my home router's external IP. Is that correct? Or should I have used the radio RRC IP?
2. I know I have to use the setup tool to change the RRC units IP addresses to 192.168.1.227 and 228 vice the default. I set the DMZ server to 192.168.1.228 which should be correct and I used that same IP for all the port forwarding settings. When I got to the web forwarding port the default was 80 but I had a conflict. I found that my readyshare USB storage was using port 80. I disabled that and then was able to use port 80 in the router setup.
3. Turned off the SIP/ALG option.
4. Should I turn on the ability for remote control of the router settings? Can you think of anything else I need to setup on the router beforehand?
When I try to access the router using the dyndns name in the browser it asks for a username and password. Which is it referring to? The router username/PW or the one setup for the dyndns service? I tried both but neither let me access the router. Is there another setting in the router that needs to be enabled to allow this?
I plan to use the netgear 2001 wireless ethernet adapter. I want to use this so I don't have to mess with more cables while operating from my house (shack is in another building) and then I can reset the adapter if I want to operate from some other location using my phones wifi tether.
Am I on the right track here or fatally flawed?
Thanks and 73
Greg - AB7R
Yesterday I ordered the RR setup and it should arrive today. Last night I started with some of the router setup but have a couple questions:
1. I registered my dyndns name using my home router's external IP. Is that correct? Or should I have used the radio RRC IP?
2. I know I have to use the setup tool to change the RRC units IP addresses to 192.168.1.227 and 228 vice the default. I set the DMZ server to 192.168.1.228 which should be correct and I used that same IP for all the port forwarding settings. When I got to the web forwarding port the default was 80 but I had a conflict. I found that my readyshare USB storage was using port 80. I disabled that and then was able to use port 80 in the router setup.
3. Turned off the SIP/ALG option.
4. Should I turn on the ability for remote control of the router settings? Can you think of anything else I need to setup on the router beforehand?
When I try to access the router using the dyndns name in the browser it asks for a username and password. Which is it referring to? The router username/PW or the one setup for the dyndns service? I tried both but neither let me access the router. Is there another setting in the router that needs to be enabled to allow this?
I plan to use the netgear 2001 wireless ethernet adapter. I want to use this so I don't have to mess with more cables while operating from my house (shack is in another building) and then I can reset the adapter if I want to operate from some other location using my phones wifi tether.
Am I on the right track here or fatally flawed?
Thanks and 73
Greg - AB7R