RRC 1258 Support in English > Configuration, RRC 1258
COM2 and VCOM port
(1/1)
ab7r:
If I want to use another radio (K3) at the control side connected to the RRC COM2 port can I also use the COM2 USB port for computer rig control/logging at the same time? If not, how can it be done?
Thanks
Greg
sm2o:
In the K3 Twin config you can use com-1 for logging in control end and com-1 for antenna switch for example in radio end. Com 1 is intelligent mixed with com 2 just for this purpose. Com-1 should the be set to mode 7 in both ends.
This is only available in the not yet relased firmware for Elecraft Twin
73 de mike
Navigation
[0] Message Index
Go to full version