Author Topic: Receiving while transmit with TS2000 / RC2000  (Read 4724 times)

ik2hkt

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Receiving while transmit with TS2000 / RC2000
« on: 2015-04-01, 16:54:21 »
Hello !

I have a TS2000 and I use it in remote with  RC2000 controller.

I setup everythink as per instruction manual under RRC1258 MKii and all it's ok with remoterig system
( and also with RRC Nano software ).

But I am not able to receive the sub-receiver while
I trasmit with the main vfo inspite of the "busy" appeare in the lcd sub vfo when squelch is open.

Maybe some setting to do for receive while transmit ?

or

Maybe it's necessary stereo headphone with different channel for each vfo ?

I have search in the previous message of the forum but nothing.

Any suggestions will be appreciated.

73's - Stefano IK2HKT
« Last Edit: 2015-04-01, 18:33:24 by ik2hkt »

ik2hkt

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: Receiving while transmit with TS2000 / RC2000
« Reply #1 on: 2015-04-01, 19:34:38 »
Hello !

I have a TS2000 and I use it in remote with  RC2000 controller.

I setup everythink as per instruction manual under RRC1258 MKii and all it's ok with remoterig system
( and also with RRC Nano software ).

But I am not able to receive the sub-receiver while
I trasmit with the main vfo inspite of the "busy" appeare in the lcd sub vfo when squelch is open.

Maybe some setting to do for receive while transmit ?

or

Maybe it's necessary stereo headphone with different channel for each vfo ?

I have search in the previous message of the forum but nothing.

Any suggestions will be appreciated.

73's - Stefano IK2HKT


Problem solved ! ....  put  fullduplex = YES + RTP tx mode = CONTINUOUS in RRC Control panel
and RTP tx mode =  CONTINUOUS in RRC Radio

73's - Stefano IK2HKT