Messages

1

Feature Requests / Re: I can no longer connect

« on: Today at 20:26:02 »

Hi
The Kenwood and ICOM nano app works OK with both IC-7100 and TS-480. Download the latest versions and check your settings you probably have something wrong. Remember that CAT cables and CI-V interfaces are needed and Correct  mode and baudrade must be setup in the Radio-RRC com2 settings. The Radios need to be set to coorect baudrate, not Automatic.

73 de mike

2

Configuration, RRC 1258 / Re: AF volume problem with K3 twins

« on: Today at 20:18:05 »

Hi

The problem is that the K3/0 does not send automatic volume updates, I told Elecraft about it 10 years ago but it was never changed. Set the volume at the remote K3 to the level you normal use, it will be the default level until you turn the volume knob manaully

73 de mike

3

Configuration, RRC 1258 / Re: IC7100: first setup failed

« on: 2024-04-23, 20:12:19 »

Hi

email me export settings(html) files from both units to support@remoterig.com

73 de mike

4

Konfiguration av RRC 1258 / Re: Icom ic 7100 senaste versionen

« on: 2024-04-17, 19:41:06 »

Du kan maila export settings (Html)filer om du vill

Micke

5

Konfiguration av RRC 1258 / Re: Icom ic 7100 senaste versionen

« on: 2024-04-17, 19:35:38 »

Kablarna skall gå till Mic/Aux i bägge enheterna
Micke

6

General discussion forum / Re: RC 1258 MK 2 S Compatibility

« on: 2024-04-09, 07:45:18 »

Hi
Yes it is, check manual for details

http://www.remoterig.com/downloads/RemoteRig_RRC1258-MkII_Users_manual-A40.pdf

73 de mike

7

General / Re: Do I need CT17

« on: 2024-03-22, 21:25:24 »

Yes

You need a interface like CT-17 or Remoterig CI-V 1332 interface

https://www.remoterig.com/wp/?page_id=3150

Note that any interface used must be powered separate as the RRCs RS-232 port cannot power the interface like a PC

73 de mike

8

General discussion forum / Re: Is the RR-1258 still available?

« on: 2024-03-16, 09:44:42 »

Yes

Limmared has stock

https://butik.limmared.nu/en/remoterig/2822-remoterig-1258mkiis-set.html

73 de mike

9

General discussion forum / Re: RRC-1258MKII & IC706 FIRST VERSION

« on: 2024-03-13, 17:03:08 »

The settings looks correct. If no nothing happens when you press power on , probably the cables are not correct or the hardware is broken. If both the RJ45s in assembled backwards it will work with the extender, but not with the boxes.  73 de mike

10

General discussion forum / Re: RRC-1258MKII & IC706 FIRST VERSION

« on: 2024-03-12, 20:17:55 »

Hi

How do you know the hardware is OK ? We are talking about a 15 years old product.

You can send export settings (htm) files from both units to support(a)remoterig.com so I can have a look

73 de mike

11

General discussion forum / Re: RRC-1258MKII & IC706 FIRST VERSION

« on: 2024-03-10, 21:20:39 »

There should not be any connect button in program mode 2. They connect when you press the power on button on the control panel

/mike

12

General discussion forum / Re: RRC1258, K3/0 mini no RF output on any mode

« on: 2024-03-02, 08:22:27 »

Hi

If SSB and FT8 gives no output it can be cauesed by by codec settings. But If also CW gives no output it's more likely a Radio problem, not a Remoterig problem

73 de mike

13

General discussion forum / Re: Setting optimizing for poor connections

« on: 2024-02-21, 20:17:45 »

Hi

for low bandwidth connections

Audio Quality = 0 is best and no dual RX

Increased Jitter buffer delay and jitter buffer size gives better tollerance for Jitter

Audio packet size = 40 reduce the amount of packets and  reduce overhead which may be better, not proven

Increased Key delay  is important for CW--transmission

the other settings has no influence

73  de mike

14

Hardware, Cabling, Installations / Re: CAT Interface for Kenwood TS480?

« on: 2024-02-18, 12:28:23 »

Ok
Ok
All USB to serial adapters I have seen so far has a male 9pin dsub like a PC port, but if you have another you need a converter as the Control RRC dsubs are female

73 de mike

15

General discussion forum / Re: WiFi board connection issue?

« on: 2024-02-17, 20:49:32 »

Hi

Ita can be many reasons for that but it has not anything to do with Wifi. Without more info it's impossible to say more. Probably some setting is wrong in either RRC or in the Radio QTH router

73  de mike