Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - TomasM

Pages: [1]
Jag har en TP-Link TL-WR1043N med dynamiskt IP från min leverantör. Jag har fasta IP hemma i nätverket.
Jag kan se min tilldelade IP adress i routern och när jag matar in den i Android appen(Settings, Address(URL)) får jag också kontakt med min WS. (Borde väl betyda att det inte är några portforwarding bekymmer?) Men när IP ändrar så kommer jag naturligtvis att tappa kontakten. Då jag inte är någon datakommunikations expert så behöver jag hjälp med att förstå vad som behöver göras... Vad exakt är det som ska matas in i fältet Settings, Address(URL) i appen? Och vad exakt behöver jag ändra i ws Dynamic DNS inställningar?
Nu ser det ut som följer:
DDNS check interval: 10
DDNS hostname:
Own host name:
Username ws1216H-2221

Jag har även nått som heter Host name i min router som är default TL-WR***. Har det nått samband med Own host name i ws?

Jag har läst hjälptexten många gånger men jag har nog lite otur när jag tänker för det klickar ej  ;)
When using DynDNS you can use your own “Host name” instead of a IP address when you want to connect to the WEB-Switch and you don’t need to bother if the IP at the remote site changes. You need to register a account at to start with. After that you enter the same information at the Internal DynDNS web page in the RRC. “DynDNS check time” sets how often the IP-check should be done. DynDNS says it should be 10 minutes or longer. If you put 0 the DynDNS client is not activated.

Android App / Setup av app?
« on: 2013-09-21, 13:52:21 »
Finns det info om hur man sätter upp appen för att kunna fjärrstyra sin webswitch? Det är Settingstabben jag antar att ska fyllas i för att få kontakt men jag lyckas inte hitta någon info om vad som ska in på  de olika fälten, Location, Address(URL) och user

EDIT: Sorry, thought it was the swedish forum...
Are there any info about how to set up the android app to be able to controll the Webswitch? I guess its the settings tab that needs to be correctly filled in to be able to get connected but I didnt find any help file about this. What should it be in the Location, Address(URL) and user fields?

After tweaking and googling I finaly managed to get connected to my webswitch.  The Address(URL) was the IP number of the unit and the user an pw was the same as in the dynamic DNS settings.

I still have some problems thoug. When going to the Relay tab, its empty. Only the Reload button is vissible. Same thing in the Temp tab. In the Car warm up tab theres some info that change when I change the settings in the webswitch so I can se its alive. Same thing with the ACP tab, a Program 1 appeared after enabling it in the switch.

Finaly got it! I needet to name the different relays in order to be able to see them in the app. Problem solved!

Byt the way, you really should consider a step by step manual, as it is now one have to be an engineer in order to get it up and running.

Well I am happy for the time beeing. Now I only need to get it installed electrically and thats the easy part.  :)

EDIT4: Well... It doesnt work at all. It just hit me that I was on the wireless network and when I switched to to 3G network, no connection. So I still need some input on how to set this up.  :(

Pages: [1]