Messages

16

General discussion forum / Re: Device Disconnected message

« on: 2015-11-18, 15:42:16 »

Exactly the same here...Win10 and last FW........ Device disconnected
FW/HW version and Setup does not work
FW update and Net info/find works

Peder
Sm2sum

17

Konfiguration av RRC 1258 / Re: Setup problem

« on: 2015-11-14, 09:23:13 »

Jag har 192.168.0.227 resp 228 som default det kanske funkar......

18

General discussion forum / Re: Nano App Assistance

« on: 2015-10-28, 19:44:55 »

I just started nano with a ts480 and it works great
First the diod must be green if it is red something is wrong.
Look on ports if you have an old setup 5060...11000...120000.
Nano has other ports as default.
If you have matching ports try delete settings restart your phone and write the settings again

19

General discussion forum / Re: Nano App Assistance

« on: 2015-10-28, 18:44:38 »

(*) Both Kenwood and Yaesu transceivers need the RTS and CTS pins to be strapped together.
JMP-3 inside the box can be used to strap them if you want to use a standard fully connected cable   (page 17 in RRC-manual)
and also add settings for com 2 inRRC.

Good luck

20

General / Re: K3 twin and Samsung S4

« on: 2015-10-05, 15:47:28 »

No it does not... I have tried with nanos service also and without.
The diode is green all the  time it was red before connection earlier
My other unit Samsung  tab 4 does not work either...

21

General / Re: K3 twin and Samsung S4

« on: 2015-10-04, 21:06:18 »

Sorry to say but it worked only that day...
Now callsign is missing all the time

22

General / Re: K3 twin and Samsung S4

« on: 2015-10-02, 08:00:52 »

Fine
Missed the small arrows !
Works very good now

Thanks

23

General / Re: K3 twin and Samsung S4

« on: 2015-10-01, 22:00:46 »

Ok

I have latest firmware  and uninstalled RRC Nano S service

 but K3 twin is from Elecraft and 1.3.0 seems to be latest update....

and l having problem to disconnect because the button disappears after the connection

24

General / K3 twin and Samsung S4

« on: 2015-10-01, 15:14:16 »

Last update 1.3.0
It,s not possible to disconnect, you can not swap back to startside.
Only way is to restart the smartphone and the RRC and power off the K3.

25

General / Re: Problem with Connection since RRC Nano Service 2.0

« on: 2015-08-12, 20:02:27 »

Updates made it work again

K3 twin + samsung tab 4 or samsung S4 both fine now.

Great job...Tnx

Peder

26

General / Re: Problem with Connection since RRC Nano Service 2.0

« on: 2015-08-08, 12:18:23 »

Hi

Same problem here
I connect and Radio starts but after 2-3 seconds is disconnected, audio is still there.
After one more connect my phone has to be rebooted and so on.

Peder

27

General / Ts480 and nano

« on: 2015-06-11, 12:10:39 »

Does RRC ver 1 work with nano after last update ?

Peder

28

Allmänt diskussionsforum / Re: Remoterig nere

« on: 2015-02-21, 17:21:29 »

Ok Göstha o Micke
Jag har inget med Telia så det var säkert mer fel oxo.
Jag kör med Dovado routrar och där finns sms-funktion till mobila bredbandet

/Peder

29

Allmänt diskussionsforum / Re: Remoterig nere

« on: 2015-02-21, 14:17:30 »

Funkade inte här heller och jag kör Ume energis fibernät
Men jag tog hem Ip via sms och startade upp med det
Peder

30

General discussion forum / Re: RRC behind 3G / UMTS

« on: 2014-11-04, 20:50:51 »

Hemut

I have used several Dovados.
UMR, 4GR, Tiny and now PRO.
All are very good but Tiny has only one USB and PRO has two
and many more options and is faster

Peder