Author Topic: TS-480 SAT Cable Info Needed  (Read 3237 times)


  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
TS-480 SAT Cable Info Needed
« on: 2012-02-02, 16:54:51 »
Hello all....I am considering purchasing the Remote Rig as I currently own the Kenwood TS 480 SAT.  I have not been able to find what the exact cables that I need to connect the TS 480 to the remote rigs.  It seems straight forward but a little guidance would be appreciated.

Regards  W3ETC


  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: TS-480 SAT Cable Info Needed
« Reply #1 on: 2012-02-02, 18:19:11 »
All cables that you need are included in the RemoteRig and TS-480 boxes. Please refer to the
newest manual, page 156-160, or look at under
the "cables" tab.

I understand that the U.S. version of the TS-480 may not include the mobile mounting bracket
and a second RJ-11 modular cable. If you need this as well, just go to a Radio Shack or similar
and buy a telephone cable that has all wires connected (I think it is called a 3-line cable or something
like that). You can see if all the wires are all connected by looking at the end of the cable.

Mitch DJ0QN / K7DX