« previous next »
Pages: [1]

Author Topic: K3 twin problem  (Read 4529 times)

ur5mid

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
K3 twin problem
« on: 2012-11-02, 22:41:24 »
I have K3/0 and RRC1258MkII (serial # 2600-radio, #2511-control) . I choose " K3 twin" in radio setting, but i dont have button "connect" in window "status". What is problems?
Firmware 2.62
Logged

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3008
    • View Profile
    • sm2oan
    • Email
Re: K3 twin problem
« Reply #1 on: 2012-11-03, 00:07:00 »
There should not be any connect button, Connection is set up automatically when pushing the power on button on the K3/0

73 de mike
Logged

ur5mid

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
Re: K3 twin problem
« Reply #2 on: 2012-11-03, 00:34:29 »
I had already read the instructions about it.
but there is no connection at startup. I replaced COM0 parity : 0 to force 1 and all is ok. But in local net, next step-internet connection.
Logged

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3008
    • View Profile
    • sm2oan
    • Email
Re: K3 twin problem
« Reply #3 on: 2012-11-03, 09:59:10 »
Parity should absolutely not be used. Use the settings desribed in the manual.

73 de mike
Logged
Pages: [1]
« previous next »