Author Topic: RC-1216H remote control  (Read 4348 times)

Mitch

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
    • 108AT101
    • Email
RC-1216H remote control
« on: 2015-06-27, 08:51:34 »
Hi there,

I am not sure if this is the correct place to post this topic here. Can anyone help me out i would like to order the RC-1216H remote control.

But I am not sure what Model of Yaesu rotators would wire strait from the RC-1216H to the control box can anyone help me out with this.

Many Thanks
Please stay safe. Best 73,   
Gary

OH2FT

  • Jr. Member
  • **
  • Posts: 33
    • View Profile
Re: RC-1216H remote control
« Reply #1 on: 2015-06-28, 17:45:28 »
Hi,

I think none. RC 1216H talks serial, so you would need a converter between.
Like GS-232B (?) or some third party control card (like ERC). The card could be installed inside
the control box in parallel to the manual pushbuttons, unless you buy a bigger yaesu, that has a mini-DIN
connector giving out the necessary signals for the card.

WebSwith 1216H & RCL 1216L might do that as well.

Joni OH2FT

Mitch

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
    • 108AT101
    • Email
Re: RC-1216H remote control
« Reply #2 on: 2015-06-30, 09:27:40 »
Hi There,

Many thanks for reply i would like to order RC-1216H remote control from the shop if needed.  I just need to know what type of Rotator and Controller box is compatible with the Kenwood 480HX without having to buy extra's

I would also like to know if I could do this without the RC-1216H like shown on the picture from the website when working my Remoterig 1258MkIIs

Many Thanks

Please stay safe. Best 73,   
Gary