Author Topic: V7 control RRC against V1 radio RRC  (Read 5682 times)

ea3in

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • Email
V7 control RRC against V1 radio RRC
« on: 2016-08-09, 17:27:31 »
Hello

My working setup is TS-480 together with a V1 RRC pair. It works perfect

Now, I have purchased a new V7 RRC to be used as the control unit (with the 480 head). I doesn't establish the connection when pressing the button at the Ts-480 head.
All firmware are the same (2.90)
I have exporte and imported the settings in order to be sure that the config is exactly the same

This RRC mix should work. Right?

Any idea?

ea3in

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • Email
Re: V7 control RRC against V1 radio RRC
« Reply #1 on: 2016-08-09, 18:16:22 »
Solved
Ignore it

A matter of jumpers

ea3in

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • Email
Re: V7 control RRC against V1 radio RRC
« Reply #2 on: 2016-08-09, 19:26:04 »
Not jumper related

It is caused by the ARP table of the etehrnet switch when changing the RRCs
If I reset it, everything is ok