Author Topic: CW transmit function needed..  (Read 5806 times)


  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
CW transmit function needed..
« on: 2018-01-03, 05:54:13 »
Hi All,

I am using RRC Nano for TS480 as well as IC7100.
It is really good for me during mobile operation.

However, One more thing I really needed is CW transmit function.
If cw keyer is adapted, it is the best.

But if it is difficult, at least Macro and key board transmit function need to be added I would like to.





  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: CW transmit function needed..
« Reply #1 on: 2018-01-26, 08:18:31 »
I have tried RRC Nano for TS480 too and it's excellent, but.. I would really need CW transmission too!  :)

At least, transmitting some macros (like RRC-micro PC software) would be fine.

Specifically for TS-480 (maybe it's easier to implement): the radio has 3 playback memories that allow transmission of 3 pre-recorded messages. This is valid for CW but would also be useful for phone (if you have VGS-1 installed)  .
This function is started by keys CH1 CH2 CH3 on radio) or by "PB" command in the kenwood serial protocol.

Many thanks for your kind attention

Mauro IK2WPO


  • Jr. Member
  • **
  • Posts: 50
    • View Profile
Re: CW transmit function needed..
« Reply #2 on: 2019-01-20, 17:04:30 »
Oh yes, CW would be nice :)

RRC 2.91, Galaxy Note 3 with Android 5.0, Kenwood (K) Nano (TS-2000), RRC-Micro 1274B