Author Topic: 1216h+1216L cabling for kenpro/yaesu 650  (Read 3741 times)

IW2DOY

  • Newbie
  • *
  • Posts: 4
    • View Profile
1216h+1216L cabling for kenpro/yaesu 650
« on: 2019-05-08, 00:29:00 »
Hi guys,

I'm looking at some cabling instructions to connect the 1216L rotor controller to a KENPRO 650XL (YAESU G-650).

I have found some schematics and as far as I can see CW and CCW should go to 4 - 5 - 6 pin on the rear of the control box
and Pin 2 - 3 should connects to POT input of the controller.
No brakes control line (not present)

Is that correct ? any advice ?

Thank you
73 de IW2DOY Edoardo