Author Topic: RRC-1258 MkII: Radio and RRC-1258 MkII: Control not connecting to each other  (Read 2318 times)

VA7CQ

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Hi my RRC-1258 MkII: Radio and RRC-1258 MkII: Control are not connecting to each other.  Can anyone help? 

Status info below:

Control

Name   Value
P5.4   ON
Radio   OFF
Connection status   Disconnected
SIP status   Unknown(1)
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   3
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
SIP Out port   13000
SIP In port   13000
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002
Other party   24.208.28.10
Input 0   High
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DNS status   OK, rsba1-remote.dyndns-remote.com = 24.208.28.10
Active profile   Default
PTT status   OFF
Common network settings   No

Radio

P5.2   OFF
Connection status   Disconnected
SIP status   Idle
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
External IP   24.208.28.10
SIP Out port   13000
SIP In port   13000
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002
Other party   0.0.0.0
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
Dynamic DNS status   OK
Ping status (watchdog)   OK [0 ms]
DNS status   OK, remoterig.com = 213.180.92.125
Active profile   Default
PTT status   OFF
Antenna-Switch (IP)   not connected
Common network settings   No

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
It could be a number of things. You didn't provide enough details to know, because it is important to understand
if you are still within your radio's network or not. The SIP contact needs to be changed accordingly, plus the ports
need to be forwarded.

I suggest that you drop me a short mail to dj0qn (at) darc.de and I will send you my networking checklist that walks
you through the process of getting this working.

73,
Mitch DJ0QN / K7DX