Author Topic: OM Power2500A strange behaviour in split mode  (Read 4857 times)

Kari SM0HRP

  • Jr. Member
  • **
  • Posts: 33
    • View Profile
OM Power2500A strange behaviour in split mode
« on: 2013-12-22, 16:35:39 »
Hello dr OM:s
I am using OM2500A with remote controller in a remote concept with the remote rig concept RRC 1258MKII.
In this set-up COM Port (1) at the remote RRC that is used to controll the OM2500A (via a null modem cable) via TRCVR RS-232 port.  Another COM Port (2) is used to steer the Elecraft K3. COM Port 2 and COM Port 1 are logically in parallell.
Working with OM2500A it works BUT not fully in split mode. The amp keep changes frequency between RX frequency and TX frequency and suddenly makes a random change to an arbitratry frequency outside the ham bands. 
Have anyone any experience with CAT controll and OM amplifiers?  
If I change routing and let K3 CAT go directly to OM 2500 TRCVR RS-232 and the from OM2500 PC RS-232 port to RRC COM2 it works in split mode. Disadvantage is that amplifier has to be in ON every time I want to use the K3. 
Any ides?  
73 Kari

Chris DL5NAM

  • Jr. Member
  • **
  • Posts: 63
    • View Profile
    • Email
Re: OM Power2500A strange behaviour in split mode
« Reply #1 on: 2014-05-27, 11:00:58 »
Did you found the bug? Best is to contact Tibi at OM-Power. A hardware fix needed. Works fine for me.

OH6RX

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: OM Power2500A strange behaviour in split mode
« Reply #2 on: 2020-06-05, 13:15:00 »
Hi Kari,

you have OM power and K3... can you share your settings files...for my fail bugging?
I have issues that OMpower inhibit blinks...and seems that OMpower gets wrong Freq data...

locally it works thru box...

73s
J-P OH6RX