Author Topic: TS-590SG Twin issue  (Read 2954 times)

sm6vtz

  • Jr. Member
  • **
  • Posts: 34
    • View Profile
TS-590SG Twin issue
« on: 2022-12-30, 12:39:56 »
Hi guys!

Using a TS-590SG twin setup since spring-22.
Some weeks ago a strange issue started.
Sometimes when I power up, there's no audio (just a buzzing sound).
Both TS-590SG powers up, however the TRX at the remote site stucks in the FW update mode, the display shows "1.07 PROGRAM".
Turned off and on the TRX at home, rebooted both RRC's yet there's still no audio besides the buzzing.
If I cut the power (13,8 V, not the mains) to the TRX at the remote site and then turn on the power again it works fine.
This workaround is rather time consuming as I need to turn on and off the power almost every time, there must be an easier way, right? :-)

Latest FW in both RRC's, TS-590SG's, Ubiquiti's PtP, all stuff in the same LAN as my remote site is rather close.

Any suggestions?

HNY!

73 Chris SM6VTZ
https://www.qrz.com/db/SM6VTZ
« Last Edit: 2023-01-08, 20:34:46 by sm6vtz »

sm6vtz

  • Jr. Member
  • **
  • Posts: 34
    • View Profile
Re: TS-590SG Twin issue
« Reply #1 on: 2023-01-08, 20:26:47 »
Hi!

Rebooted the router (uptime almost 90 days) and now it seems to work as it should.
Note to self, reboot your router way more frequently.

73 Chris SM6VTZ