Audio problem

[Mitch]

Hi there can anyone help me out regarding audio problem between RRC boxe's.  I have not worked my Kenwood 480 for some time now. Face and radio side work fine but problem with audio remote.

I have installed it again with same setting's but for some reason there is no incoming audio. I can see both control side at home OK and radio side at remote side fine. I am not sure if maybe it has changed and this could be my problem.

Any help would be grateful to get me online again,

73s Gary

[Mitch]

After looking into Radio, status page it show

SIP Out port   13000
SIP In port   13000
Audio Out port   1198
Audio In port   13001
Command Out port   62758
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002

In a old image pictures of radio and control side that worked OK. Both radio and the control side settings are a correct copy as before that worked great.

Radio turns on fine but still can't get no Audio from the Kenwood 480 remote. Tried this with both my 480 HX and Sat version.

[HB9BJL]

Hi Gary

have a look at

https://www.qsl.net/hb9bjl/

and check the ports and the forwarding of both radio and control units on your router.
My setup works fine.
I have posted some screenshots for the TS-480 setup.

What is your callsign ?

73 de Christian
HB9BJL
W9BJL

[Mitch]

Hi Christian

Thank you for your reply, I did notice your post and followed Radio side and control. All port forwarding looks Ok within router and connects fine just audio and power.

Also had a look and rewired the jumpers within both boxes hoping it maybe this was causing the problem with no joy yet.

Hope to try get back to the radio sode when i get home over the weekend. Again many thanks for your help.

73 Gary