Messages

31

General discussion forum / TS-480 and RF feedback

« on: 2010-05-10, 01:22:47 »

I have come to understand that the Remoterig + TS-480 combination is sensitive to RF feedback. I get a lot of feedback, and on lower bands I can't even run 10 watts without feedback. I am using a separate power supply as described in the TS-480 setup. I tried ferrites, different power sources and grounding the radio in the station ground without any noticeable improvement. When connecting the mic direct to the radio everything is fine and all feedback is gone...

Any specific ideas for the TS-480 on how to get rid of the feedback?

73 de Björn,
SM0MDG
SE0X

32

General discussion forum / TS-480 and router config

« on: 2010-05-10, 01:13:51 »

I am having big troubles connecting to my remote station, a TS-480. Everything works when connecting via the local Lan, but I am not able to get a connections from the outside. I have added port forwarding for the suggested ports including change of SIP port # to 5061. I have a D-Link DSL-2640B at the station site and a Netgear DG834PN between my remote head and the internet.

When I try to connect (using power button) the yellow led on the Remoterig interface lights steady, and sometimes the display lights up, but most if the times noting at all happens except for a weak clicking noise from the speaker. When the display lights up there is no audio received, but there seems to be outgoing audio as the power and ALC meters moves when I try to transmit. It seems not possible to control the radio, only Power on/off is functional

Any ideas? Anyone using the routers I mentioned and have specific ideas?

Status at Radio end:

Name   Value
Radio   ON
SIP status   Connected/transfering
Last SIP error   None
RTP Timeout   59
SIP Timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
SIP Out port   5061
SIP In port   5061
Audio Out port   11020
Audio In port   11000
Command Out port   12000
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   ---removed---
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low

Status at control end:

Name   Value
Control panel   ON
Radio   ON
SIP status   Connected/transfering
Last SIP error   None
RTP Timeout   60
SIP Timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
SIP Out port   5061
SIP In port   5061
Audio Out port   11000
Audio In port   11000
Command Out port   12000
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   ---removed---
Input 0   High
Input 1   High
Input 2   High
Output 0   High
Output 1   Low
Output 2   Low

73 de Björn,
SM0MDG
SE0X

33

Allmänt diskussionsforum / Re: Stereo - Diversity

« on: 2010-02-26, 10:10:18 »

Hårdvaruuppdatering eller nya burkar?

34

Allmänt diskussionsforum / Re: Stereo - Diversity

« on: 2010-02-24, 16:36:54 »

Kommer nuvarande interface kunna uppdateras med nya codecs när det blir aktuellt?

35

Allmänt diskussionsforum / Re: Stereo - Diversity

« on: 2010-02-20, 13:53:40 »

Finns det några planer för stereo codec? Det är ju inte helt ovanligt att vilja använda bägge mottagare när man kör split...

73 de Björn

36

Allmänt diskussionsforum / Stereo - Diversity

« on: 2010-02-04, 00:34:11 »

Går det att konfigurera stereoljud för diversity mottagning?