Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jkmusic

Pages: [1]
1
Hi,
The Icom 7100 allows configuration control via the RT Systems Software thru the standard mini usb on the back of the radio.  This works well.  Insert Remote Rig.  A little different.

I need to convert standard mini usb to DB9 to connect to the 1258.  The only conversion needed is the USB to DB9.  The 7100 doesn't not need any adapter to work with RT Systems if it is local.  I have found standard FTDI and Prolific adapters.  Problem is that there is really no Com Port pass thru setting on the 1258.  So...

1) How can I get Com 1 on remote to pass thru to com 1 on the 1258 Control? (generic pass thru, no intelligence)
2) These adapter cables, whichever works, will be powered via their connection to the 1258 & radio....is that ok?
3) Will the drivers load on the laptop remotely with the 1258s acting as a transparent connection?
Note - CI-V Cable and HRD, chirp work fine via 1258.  But there is also a setting for this. Its just the RT Systems memory management is superior. Look at it this way figuratively....I need to do the same thing if I were to run a mouse remotely on a computer via the 1258.  No different.

Thanks for your help.

2
Hi,
I use these 1258MKII for remote operation of my Yaesu 857D.  Love it.  But for about a year still I have found no way to use the com ports to program the memories...or to use HRD if I choose. I have the USB Dongle that works great if I am at the rig.  Not remote.  I even have the RT Systems dongle.  I am not even sure how to connect these as my dongle is a CAT to USB.  Please help.  Assume nothing and please be detailed.

Thanks,
Kevin

3
I am using the 1258 pair for my Yaesu 857D.  The Yaesu is at a tower connected to my YT-100 tuner.  No problems there.
I am exhausted trying to get any form of memory control for the Yaesu to work.  HRD, Chirp...(would try FTBasic but locked without purchase) I tried a Linux Ubuntu box there with the Yaesu RT USB cable.  Hours of settings using chirp......no go. 
I have read in this forum where the control end can simply connect to a computer on com 2 and I can set the 1258 to Logical parallel with Com zero.  I have used FTBasicMMO tool (free) to monitor the usb port on the front of the unit and data just pours......but evidently nothing intelligent.  I have purchased a serial com to usb converter.  Also no luck.

Surely.  Surely, there is a specific manner to make this work.  I don't care what adapter I need or what software....I just want the thing to work.  I have the I/O connected to read the led on the YT-100 Tuner and even push the button.  That works great! Full Remote head, no problems. 

Please assist with absolute, detailed, non assuming instructions to make this work.

Thanks very much,

4
Configuration, RRC 1258 / Using MiFi at the Rig Site
« on: 2016-09-20, 15:50:15 »
Hi,
I am mounting an 857D at a remote tower site.  I would like to use an ATT mifi as the internet connection for the rig. In a nutshell, will this work? I can set a static LAN IP for the 1258 but will time outs, etc keep the wifi from joining to the RemoteRig DDNS? Any help appreciated before I go to all this trouble and make an unreachable rig.
Thanks,
Kevin

5
Hi,
Searching and searching.....no luck.
I need some details on controlling a relay at the remote site and also sending back an LED indicator to the control site.  I want to use the existing pair of MKIIs I have (don't want to buy the relay option).  I already have some isolated relays, switches and LEDs.  I know someone has done this.  Ultimately I will remote control a tuner with a push button, and return back the LED indicator that blinks.  I could experiment but don't want the risk if not necessary.     

Thanks for your help!  I love this product. 

Kevin

6
Hi,
I love my 1258s! The remote panel works great.  Now I want to use HRD as well, only for the graphic editing, control, etc. Not for audio.   
I see no plain and simple instructions anywhere.  I have purchased a Cat-62 to com port cable.  I have tried every setting, etc.  I am using Windows 10.  I have even adjusted the local USB to 4800 baud.  Seems you could just connect via IP.  Don't know.  Please help step by step.  BTW, HRD would like to know as well. 
Thanks,
Kevin

Pages: [1]