Author Topic: Control RRC is confused :-)  (Read 8978 times)

K7FL

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
    • Email
Control RRC is confused :-)
« on: 2016-01-11, 00:45:38 »
I had to reboot the Control RRC  a couple of times today. After one reboot, the rigs failed to communicate and investigating, I found the Control RRC has somehow renamed Radio. In addition, the original serial number now indicates a 1. I reloaded the firmware to no avail. No communications between the RRC's, but I can ping each IP number.
Dennis, K7FL


K7FL

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
    • Email
Re: Control RRC is confused :-)
« Reply #1 on: 2016-01-11, 06:00:30 »
Let me clarify my initial post...

The RRC box initially named CONTROL 192.168.0.227 has apparently been renamed to RADIO. It appears the firmware loaded in the RRC formerly labelled CONTROL is now the RADIO RRC content (for example, going to 192.168.0.227 and selecting Radio Settings now shows no place to add the SIM Contact IP address).

As stated in my initial post, the serial number of the CONTROL (now RADIO) RRC has been set to 1.

I've reinstalled the firmware but no joy.

Dennis, K7FL


Jan (Microbit)

  • Software Developer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1830
    • View Profile
    • Email
Re: Control RRC is confused :-)
« Reply #2 on: 2016-01-11, 11:05:40 »
Something has corrupted the settings. You need to open up the RRC and see what the correct snr is, unless you happen to know that already ;) If you provide us with that we will be able to help fixing the faulty settings.
Always include type of hard/software and version when asking for support.

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3037
    • View Profile
    • sm2oan
    • Email
Re: Control RRC is confused :-)
« Reply #3 on: 2016-01-11, 12:35:21 »
Hi
open the box and check the serial number on the sticker and send a email to me, then I will instruct you how to recover the unit

73 de mike

K7FL

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
    • Email
Re: Control RRC is confused :-)
« Reply #4 on: 2016-01-11, 16:47:27 »
Sent serial number info to SM2O.
Thanks!
73
Dennis, K7FL

K7FL

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
    • Email
Re: Control RRC is confused :-)
« Reply #5 on: 2016-01-12, 16:37:01 »
Thanks ... the serial number for the Control is 9777.
Hopefully I can receive the build file soon as I am unable to communicate with the Radio end until the Control is working.
73
Dennis, K7FL

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3037
    • View Profile
    • sm2oan
    • Email
Re: Control RRC is confused :-)
« Reply #6 on: 2016-01-12, 16:42:23 »
I have emailed you instructions

73 de mike