Author Topic: Connection Confirmation  (Read 3449 times)


  • Newbie
  • *
  • Posts: 6
    • View Profile
    • Email
Connection Confirmation
« on: 2018-04-20, 06:22:23 »
Anyone, Everyone,

On the Radio-RRC, I have a (RJ-12) connection from the TTL to my Icom using a 3.5mm C-IV connector. Can I address the RJ-12 jack located on the front of the Radio-RRC? a toggle that turns the TTL on or off! How can I be certain that data is passing from the Control-RRC through the Radio-RRC at the TTL RJ-12 connection?



  • Administrator
  • Hero Member
  • *****
  • Posts: 3020
    • View Profile
    • sm2oan
    • Email
Re: Connection Confirmation
« Reply #1 on: 2018-04-20, 08:46:30 »
The TTL connector is also called com0 baudrate settings etc are done under Radio settings. if you use a USB cable at the control-RRC you connect your pc program to the virtual com port com0 and activate USB under radio settings. If you use a RS-232 cable you connect it to RRC com2 and set com2 to be in parallell with com0 under serial settings

73 de mike