Author Topic: TS-480, RRC, FSK via com1  (Read 6478 times)

dl9ndv

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
TS-480, RRC, FSK via com1
« on: 2011-02-16, 11:01:03 »
Hello,

I try to use my homemade FSK interface with TS-480 and remoterig and I´m absolutely stuck.
The combination is: TS-480, RRC-1258II, CAT via COM2, FSK and PTT interface (with NPN transistors at TXD and RTS pins) on COM1.
Connecting the FSK direct to a serial port or a usb2ser adapter works fine.
Using remoterig (inside the LAN) everything (radio, CAT, CW) works fine. But no way with the fsk adapter. Neither with a serial port nor with usb2ser.
I tried the com1 modes 1, 3 and 5 at different baud rates. Nothing.
I browsed the forum, but found nothing. Perhaps I missed a thread? So any help, even a RTFM is appreciated.

73 de Michael, DL9NDV

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: TS-480, RRC, FSK via com1
« Reply #1 on: 2011-02-17, 08:32:56 »
Remember that the COM 1 do not have all pins connected, So I guess you need to have a Interface which is NOT powered from the serialports as most of the home made transistor interfaces are based on. Better build one with a MAX232 powered separately.

73 de mike

N6IE

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • Email
Re: TS-480, RRC, FSK via com1
« Reply #2 on: 2011-02-18, 06:39:28 »
I would like to see how this is done.  Does anyone have a schematic or are there ready-made solutions?

Ron
N6IE