Messages

76

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-08, 22:40:52 »

I'm trying to update my RR DDNS Host using several android-client dynamic dns and doesn't work.

All of them tell me "connection to https://ddns.remoterig.com refused"

I don't know what happens...

77

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-08, 19:49:56 »

Thanks Palle:

I know that is build in the RR, but I only want to know if it can be possible. I know it is a nonsense...

I've tried with different DNS including the google server 8.8.8.8 (you can read at the beginning of the post) with no success.

Thanks, 73's

78

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-07, 20:10:48 »

Hi there:

The router is a shared router and I don't want to set it up to update dyndns. Sometimes I use that pc remotely and dyndns is updated at start thanks to dyndns updater software.

Anyway, next weekend I'm going to drive there and I'm going to try using DHCP instead of fix local IP (as Mitch said).

Mike, I send you an skype invitation. If you want to connect to my radioRRC via telnet, (It will be great)  I can give you the IP and password by skype.

Thanks

79

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-07, 12:22:08 »

I've just realized why it works with dyndns.org:

It works because I update the IP using the dyndns updater software installed in a pc located at radio Site. Therefore, the problem is the same (with dyndns or with RR ddns) but is working with dyndns because the IP is the real updated IP.

Is there any possibility to update the RR DDNS IP using some kind of software? (like the dyndns updater).

Thanks, 73's

80

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 22:45:51 »

I don't know if this helps:

At radio side, the RRC is conected by ethernet to a Nanostation (in Bridge Mode) and from this Nanostation I connect to the router. It's a wifi connection to the router, not a ethernet connection.

81

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 22:41:10 »

Thanks Mitch for your polite attention:

I'm using this DNS from google (8.8.8.. I've tried with several servers even the one that uses the router and always the same: dyndns OK, Remoterig DDNS not OK.

Next weekend I'll be able to change to DHCP in the radio side router following your explanation. I'll let you know.

Thanks, 73's

82

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 22:28:19 »

The same result with RR DDNS....

But I don't know why it works with dyndns and doesn't work with RR DDNS.

I have this trouble since I bought it, I've never could use RR DDNS.

I've just tried with DHCP at control side and still the same.

Thanks

83

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 22:24:17 »

Radio Side (now working with dyndns.org):
Radio   ON
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   OK(35)
SIP command timeout   0
Rx Jitter buffer size   8
Rx Jitter delay   6
Dual Rx   0
Current audio packet size   40
Current audio quality   0 - alaw 8 kHz
SIP Out port   5061
SIP In port   5061
Audio Out port   13000
Audio In port   13000
Command Out port   12000
Command In port   12000
External SIP In port   5061
External Audio In port   13000
External Cmd In port   12000
Other party   83.231.74.39
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
Dynamic DNS status   Unknown
Ping status (watchdog)   Off
DNS status   Querying status
Active profile:   Default
PTT status:   OFF

84

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 22:16:57 »

At control side at have this:

Control panel   OFF
Radio   OFF
Connection status   Disconnected
SIP status   Idle
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   8
Rx Jitter delay   6
Dual Rx   0
SIP Out port   5061
SIP In port   5061
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   12000
External SIP In port   5061
External Audio In port   13000
External Cmd In port   12000
Other party   0.0.0.0
Input 0   High
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DNS status   OK, g97p2olp.ddns.remoterig.com = 79.159.158.135
Active profile:   Default
PTT status:   OFF

But this IP is not my external IP at the moment...may be is the last updated IP

85

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 22:14:30 »

You don't say what status page do you want to know (Radio side or Control side) and you don't answer to my last two questions...

Thanks Mitch: I'm using fix internal IP in both sides...I can try DHCP at control side, but I can't try it at Radio side because I'm using DMZ.

Thanks

86

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 18:25:30 »

Thanks Mike:

I tried with several DNS IP's and with the same result with all of them.

If the DNS IP was wrong, I vas be able to connect with dyndns? Why is everything OK with dyndns and not with Remoterig DDNS?

87

Configuration of Routers, Firewalls, etc / Re: RR DDNS Database not working for me

« on: 2013-10-06, 16:59:01 »

I have the same problem. Everything is ok with dyndns, but with RR DDNS doesn't work.

At the DDNS remoterig status web, appears updated in August 2012, but since then, my IP has changed, but this change is not updated (I don't know why).

73's

88

Configuration, RRC 1258 / Re: IC-706 audio pauses over internet

« on: 2013-08-07, 13:57:14 »

I forgot mention that at the remote side I also have a PC using the same connection. In this PC I can browse over internet very nice way. No problems with youtube videos and so on.

73's from EA5EXK Juan Carlos

89

Configuration, RRC 1258 / Re: IC-706 audio pauses over internet

« on: 2013-08-07, 13:53:00 »

I have the same problem with my ic-706. At the remote site, the remoterig is connected to the router using a Nanostation M2. The Status page is like that, but I almost always have audio microcuts that make cw operation imposible:

Radio   ON
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   OK(34)
SIP command timeout   0
Rx Jitter buffer size   8
Rx Jitter delay   6
Dual Rx   0
Current audio packet size   10
Current audio quality   0 - alaw 8 kHz
SIP Out port   5061
SIP In port   5061
Audio Out port   11000
Audio In port   11000
Command Out port   12000
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   83.231.77.139
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
Dynamic DNS status   Unknown
Ping status (watchdog)   Off
DNS status   Querying status
Active profile:   Default
PTT status:   OFF

90

Configuration, RRC 1258 / IC-706 easy tutorial to connect CAT

« on: 2013-01-08, 17:58:39 »

Hi everywhere:

I'm planning to use the CAT through my remote system, but I have some doubts...

At Control side: I think I must conect PC to the USB conector and Change "Use USB Com port as COM1" to YES. Is not possible to use the COM2? What Mode should I select?

At Radio Side: I want to connect COM2 to the CAT interface in my Icom. Is it possible?

Please, I need a very simple tutorial for my radio, because all the related topics I see are about the K3 configuration.

Thanks