Author Topic: Using HRD (and 1258) with Yaesu 857D Help!  (Read 3193 times)

jkmusic

  • Newbie
  • *
  • Posts: 16
    • View Profile
Using HRD (and 1258) with Yaesu 857D Help!
« on: 2016-07-11, 23:48:35 »
Hi,
I love my 1258s! The remote panel works great.  Now I want to use HRD as well, only for the graphic editing, control, etc. Not for audio.   
I see no plain and simple instructions anywhere.  I have purchased a Cat-62 to com port cable.  I have tried every setting, etc.  I am using Windows 10.  I have even adjusted the local USB to 4800 baud.  Seems you could just connect via IP.  Don't know.  Please help step by step.  BTW, HRD would like to know as well. 
Thanks,
Kevin
« Last Edit: 2016-07-12, 00:01:56 by jkmusic »

jkmusic

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Using HRD (and 1258) with Yaesu 857D Help!
« Reply #1 on: 2016-07-12, 00:53:44 »
Remote Control
COM1 mode   
Inactive
    
COM2 mode - Logical Parallel with Com0   
COM2 baudrate   - 64000
COM2 data bits   8
COM2 stop bits   1
COM2 parity   Off
COM2 terminator (hex) Zero   
Use USB Com Port as COM2 - YES   
Com3 Extra Mode - Inactive
 
Radio - All same
Com 2 connected with Cat-62 cable

Control - connected with mini usb to standard tp PC 

PC Shows:
RRC1258 COM0 (Com6)
RRC1258 COM1 (Com7)
RRC1258 COM2 (Com4)
RRC1258 ComExtra (Com5)
There is no "Microbit RRC Virtual Comport (COMX)"

 

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Using HRD (and 1258) with Yaesu 857D Help!
« Reply #2 on: 2016-07-12, 08:40:48 »
You should setup com 2 in both RRC to the same baudrate as the 857 is set to normally 4800 or 9600 baud, 8 bit 2 stopbit no parity. HRD is set to same baudrate and to connect to COM4 (RRC com2).

IMPORTANT is that you have a original Yaesu CT-62 which is powered from the radio. There are many pirates available on ebay which is stealing power from the PC, they are not working.

73 de mike