Author Topic: Will the control & radio remote rigs connect to each other if there's no radio?  (Read 2219 times)

MW0NRE

  • Newbie
  • *
  • Posts: 10
    • View Profile
Just doing the initial setup and thought I'd check that the remoterigs were connecting but I'm seeing Disconnected, is this expected with no radio gear attached, or have I done something wrong?

Niamh

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Niamh,

Mike may wish to confirm, but I am very sure that it can not connect without a rig.

73,
Mitch DJ0QN / K7DX

MW0NRE

  • Newbie
  • *
  • Posts: 10
    • View Profile
Thanks Mitch, I was trying to proceed in small steps checking each stage.

Niamh

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Hi

both files are from the control-rrc

in ft-857 mode it will not work without a radio as PWR-ing on the frontpanel is initiating the connection

modes where there is a connect button on the status  page will work without a radio

73 de mike

MW0NRE

  • Newbie
  • *
  • Posts: 10
    • View Profile
That'll teach me to rush! Correct radio config attached.

Will try a different mode to test that the remoterigs are communicating

Niamh