2536
Configuration, RRC 1258 / Re: Audio Transfer Short Interrupts
« on: 2011-10-26, 18:27:13 »
If you use the internal keyer function int the RRC the length of dit and dah are not at all depending on the internet connection, they are generated at the remote side and the ratio between dit and dah are constant, the ratio can be set in the keyer setup.
The key delay can be increased to improve the tolerance against Jitter, you set side tone to 0 then you can hear the side tone from the radio eg. what is actually sent from the radio when testing what value you need for the key delay
73 de mike
The key delay can be increased to improve the tolerance against Jitter, you set side tone to 0 then you can hear the side tone from the radio eg. what is actually sent from the radio when testing what value you need for the key delay
73 de mike